The end of the autumn cruising season brings the quiet task of putting the ship away. As the final charter guests depart, the crew turns their attention to the stowage spaces. A methodical yacht tender garage toy checklist ensures that floating platforms, pools and docks are inspected, washed and packed away properly before winter haul-out or a long passage. Taking the time to do this correctly prevents unwanted surprises when the gear is unpacked next spring.
The autumn inspection checklist
A thorough superyacht water toy safety audit relies on clear steps. Following this process helps deckhands and bosuns verify that the gear remains ready for the coming season.
- Inflate the equipment on a clean surface free of sharp objects, bringing it to the pressure stated in the product instructions.
- Examine all drop-stitch seams to ensure the fabric remains firm and parallel, holding its shape without rounding out.
- Rinse the teak-look surface thoroughly with fresh water to remove any lingering sea salt.
- Check the connection loops where the AirLink Tube slides in, verifying that the integrated straps are intact.
- Test the electric Air Pump for Inflatable Docks 500W or the 1200 W model to confirm it fills the equipment smoothly.
- Inspect the AquaStair Ladder Set and its four steps to confirm the structure is ready to reach 95 cm below the waterline next season.
- Wipe down the 0.9 mm PVC body with a mild soap solution and allow the item to air-dry completely.
Assessing valves and modular connections
A proper crew end of season equipment check includes testing the valves. Every valve must be closed for inflation and capped afterwards so that the product holds its pressure. When you inspect a Premium Teak Platform 2.05 m, confirm that the fitting sits tightly within the reinforced PVC. Air expands as it warms, so note how the pressure behaves if you are doing your checks on a hot, sunny day. The modular connections require the same careful review. The inflatable connecting tube, which measures 200 x 30 cm, links these units together into one floating structure. Inflate it until it is rigid, slide it into the connection loops and fasten it to ensure nothing shifts while moored.
Washing and drying the surfaces
Dockee products are designed for the marine environment and need little maintenance. The top of the platforms and jet ski docks is a non-slip surface with the warm look of a teak deck. It is a teak look only, not real wood, so it needs no oiling or sanding. A regular, gentle clean is enough to keep its appearance. Give the equipment a thorough wash with fresh water after contact with salt water. Clean the fabrics with a mild soap solution. Since these products spend long hours in direct sun and sea water, the materials are chosen to be UV- and saltwater-resistant. Removing the dried salt crystals prevents unnecessary abrasion when the items are folded away.
Packing for winter haul-out
Moisture is the enemy of stored equipment. Make sure the product is completely dry before you deflate, fold and pack it. Any trapped moisture can cause issues during long months inside a dark compartment. When not in use, store inflatables and covers dry and out of prolonged direct sunlight. A detailed care guide is included with every order to help with these final stages. By treating the drop stitch seam inspection and the washing process as distinct tasks, the deck team will find a well-ordered toy garage waiting for them next year.
Reviewing safe use guidelines
While packing the equipment, it is good practice to review the operating protocols. Use floating products in calm, sheltered water. You must bring them in or secure them well when wind and waves build up. Tie lines only to strong, suitable fixing points on the yacht and keep them clear of propellers. Always switch off engines and thrusters while anyone is in the water near the stern. You must always supervise swimmers, especially children. If you require tailor-made adaptations for the next season, the process starts with a conversation about your yacht and ends with a product checked before delivery. Tailor-made items are excluded from the standard returns policy, but all unused standard items in their original packaging can be returned within 14 days of delivery. All our products carry a warranty of 2 years from delivery, and we provide worldwide, fully insured shipping.
